1. After the inspection, clean the dirt on the surface of the equipment with clean water, wipe it with a clean towel, and put it back in place according to the packaging requirements; do not allow the equipment to be squeezed, collided or impacted to cause unnecessary damage. The dust on the camera window and display screen should be cleaned with a clean cotton ball dipped in anhydrous alcohol and wiped from the inside to the outside;

2. The handheld wireless controller should be charged in time. If it is not used for a long time, it should be charged and discharged at least once every 3 months;

3. When the equipment is finished and the internal heat is high, it should be placed for 5-10 minutes before being put into the box;

4. After each operation, the dust cover corresponding to each joint should be covered;

5. After the control system has been working for 6 months, routine maintenance should be carried out in time, and the cooling fan and dust removal work should be replaced;

6. After the crawler has worked for 100 hours, the screws of the structural parts should be tightened. If it is placed for more than 6 months, the grease in the machine should be replaced and the sealing condition should be checked;

7. The front camera system is the same as above;

8. When using a 48V/8AH battery (optional), please charge the battery in time when the system undervoltage alarm occurs. During the charging process, when the charger indicator turns green, charging is completed; if the battery is not used for a long time, it is recommended to charge and discharge the battery once every 1-3 months.